Female Spade Connectors (x100)
SHK023-100
AVISHOCK™, HARDWARE & CHARGERS
Avishock™ Bird Shock Track is flexible and adaptable, nearly invisible, extremely long-lasting, and humane. It was created with easier and safer installation in mind, featuring snap connectors and longer rolls, no sharp parts to reduce the risk of injury, and with a flatter base to help reduce the use of glue. Condition birds to stay away with low-profile electrified track that conforms to any architectural surface.
Enhanced design
Low-profile design ideal for preserving building aesthetics.
Fewer energizers and power sources are required, making installation very fast and reducing material costs. The flexible track is quick and easy to apply. Less glue is required, saving time and glue expense. Copper strips are covered by a conductive plastic cover, protecting them from harsh weather conditions. Reliable performance over a long period of time due to UV and weather-resistant materials.
Favored by clients, architects, and installers over other solutions, used extensively on heritage sites and challenging building designs as well as modern buildings where aesthetics are most important.
65 ft. Rolls
Black – SHK102
Stone – SHK101
Grey – SHK105
Brick Red – SHK106
Straight Connector
(x20) SHK121
Corner Connector (x20)
SHK122
Jumper (x20)
SHK123
Male Spade Connectors (x100)
SHK029-100
Connector Ring Terminal (x10)
SHK024
Special Adhesive
Can be used to adhere Shock Track to a variety of surfaces. Weatherproof; works on a wide range of material.
10.5 oz. tube
SSA
Warning Plates (x25)
Hard-wearing plastic
SHK032
Warning Window Stickers (x100)
SHK033
Solar Battery Charger
300-2,500 ft. of track
SHK-C-SOL
Drainage Tubes (100 pack)
To be used anywhere where water pooling is a risk, e.g. flat or gently sloping substrates. Apply enough tubes to allow drainage e.g. 2 tubes every 1 ft.
SHK130
Digital Voltage Tester
Used to test that the track is powered. Tester reads in 100v increments up to 10,000. Put one probe to one track braid and the other to the second track braid. The reading should be between 5,000v and 9,000v (5.0 – 9.0kV)
SHK05
Lead Wire (65’)
Heavily insulated, twisted copper is easy to cut, strip and crimp. Used for connecting track to track to energizer.
Brown: SHK111
Black: SHK112
Wire Guides screw on (x100)
SHK031
Wire Guides stick-on (x50)
SHK034
AvishockTM Shears
Ideal for cutting AvishockTM track and lead wire.
SHK13
Connector Crimp Tool
Used to crimp the connectors to the Lead Wire.
SHK052
Wire Stripping Tool
Used to strip the insulation from the Lead Wire.
SHK053
AvishockTM 45° Cutting Guide
A handy tool to ensure quick and accurate mitre cutting. Simply line up against the track and cut along the edge.
SHK054
Our experts are ready to help, call us for a free consultation